Equipment
Router Repair in Nairobi, Kenya
Routers fail through power faults, port damage and corrupted firmware. Sinsal repairs the router board so the device keeps its configuration, mounting and role in your network.
Equipment Covered
- Business and ISP routers
- Routerboards and CPE routers
- Edge and branch routers
- LTE and wireless-WAN routers
- Router power adapters and supplies
- Small-office gateways
Common Faults
- Router with no power light or no start-up
- WAN or LAN ports that do not link
- Surge damage to ports and power stages
- Reboot loops caused by unstable power rails
- Corrupted firmware or boot loader
- Overheating from poor ventilation
Diagnostic Process
- 01Record of the model and the failure history
- 02Inspection for surge, heat and corrosion damage
- 03Rail analysis and power-up behaviour on the bench
- 04Port-stage and regulator checks with oscilloscope and thermal imaging
- 05Hardware versus firmware determination
Repair Process
- 01Replacement of failed regulators and port protection devices
- 02Repair of damaged connectors, pads and traces
- 03Hardware-level firmware recovery where applicable
Testing and Validation
- Rail and boot verification
- Port checks where a test setup is practical
- Extended run to confirm stability
Frequently Asked Questions
Common Questions
Can a router with a dead port be repaired?
Often. Port faults are commonly caused by surges damaging the interface components, which can be replaced.
Do you repair routerboards?
Yes, at the board level, subject to assessment of the model and the fault.
Have Failed Routers?
Describe the equipment and the fault. Sinsal will confirm whether it is a fit for diagnostics and repair before any work begins.
Already submitted equipment? Track your equipment